Dear Dr. Deepak Bhanot,

Thanks a lot

Tăng Quốc Quân

Your suggestions are being acknowledged in the article

Dear Dr. Deepak Bhanot

Thanks a Lot……

Regards
Girish Kulkarni

Many thanks again. We value your useful inputs and are pleased to inform that for the benefit of others the points suggested have been incorporated into the article

Dear Girish,
You appear to be a well informed and knowledgeable person.I would welcome you to contribute to the site by posting me short articles ,say400-500 words length which you feel will benefit the rest of our readers. The articles after approval will be published on the site under your name as guest contribution.In case you require any further details regarding the articles please feel free to contact me on my e-mail.
Best regards
Dr Deepak Bhanot

This is very good Information. I want to add some more to it

1. A flashback arrestor must be used when working with flammable gases.(such as Hydrogen & Acetylene). In the event, a fire propagates through the hose the arrestor will stop the fire from reaching the tank.
2. Never use oil or grease on or around oxygen cylinders, valves, fittings or regulator as it may cause fire or explosion.
3. Cylinders with neck threads should have a cap in place over the valve. Remove the cap by hand. Never use a screwdriver, crowbar, or other leverage device to remove the cap
4.Read the cylinder label to confirm the gas received is the gas purchased. Never identify the product by the color of the cylinder.

Thanks……..
Girish Kulkarni.